The Sluice Conduit: a small grey hub with a green verdigris boss on each face
Carries
Fluids, arriving at once
Length
As long as you like, with no lag
A pulling collar draws
Up to 1,000 mB/t to start
Upgrades
Tier kits, on pulling collars
ID
enthalpy:sluice_conduit

What it does#

Got water, lava, oil or fuel that needs to be somewhere else? The Sluice Conduit is a slim fluid pipe that carries it from tanks and machines to other tanks and machines.

It's the fluid twin of the Freight Conduit, with the same collars, the same wrench steps and the same turn orders. If you've built one, you can build the other.

Its runs have a glass window on each side, so you can see what's flowing. Watching lava glow its way across the base never gets old.

Building it#

Sluice ConduitCrafting Table
8
  1. Place conduits so they touch, face to face, and they join into one line.
  2. Place a conduit against a tank or a machine, and it grows a collar there.
  3. Wrench the collars that need a job other than the starting one (below). The Calibration Tablet or another mod's wrench will do.
  • A wrench on a join between two conduits cuts it, on both. Use it again to rejoin.
  • A wrench on a side with nothing to join makes the conduit look again for something to connect to.
  • Conduits only join their own kind. Sluice Conduits never join Freight Conduits or busbars, so you can run all three side by side.

Collars#

You can tell what a collar does from its shape. Click it with a wrench to step to the next job. The message above your hotbar names the block and the job, for example Down: pulls fluid from the Bulkhead Tank.

From left to right, these are the three shapes: follow, push and pull.

A Sluice Conduit over a Bulkhead Tank, ending in a plain band with a green inlay
A Sluice Conduit over an Igneous Engine, ending in a funnel narrowing into the engine
A Sluice Conduit over a Bulkhead Tank, ending in a funnel that opens out onto the tank with its petals pressed flat
CollarLooks likeWhat it does
1. FollowA plain bandThe starting job. It does what the block's own sides say. A tank or machine with Auto-output on pushes fluid into the band. The band feeds the block any fluid its side will take.
2. PushA funnel with its narrow end in the blockFluid flows into the block, ahead of every band. It takes nothing out.
3. PullA funnel with its wide end on the blockFluid flows out of the block, all the time. Use it on tanks that don't push fluid out by themselves. It feeds the block nothing.
4. DisconnectedNo collarThe conduit ignores the block. Click again to start the loop over.

Fluid always flows from a funnel's wide end to its narrow end.

Where the fluid goes#

Fluid follows the same rules as items in the Freight Conduit.

  1. Pushing collars come first.
  2. Bands come second. They get what the push collars had no room for.

Fluid never goes back into the block it came from. Within each group, the turn order of the collar the fluid came in through decides who gets it.

Turn orderWhat it does
Round robinThe starting order. Shares fluid evenly between every block with room.
Nearest firstFills the nearest block before the next, counted along the conduits.
RandomSends fluid to a block picked at random, and fills it while it has room.

Only bands and pull collars have a turn order. Turn order on the Freight Conduit's page says more.

Filters#

Push and pull collars each have a filter with five places. Leave it empty and every fluid gets through.

  • Click a place with a bucket, or anything else holding a fluid, to set it to that fluid. The container stays full and in your hand.
  • With JEI installed, drag a fluid from the JEI list onto a place.
  • Click a place with an empty hand to clear it.
  • Whitelist passes only the filtered fluids. Blacklist passes everything else.

On a push collar the filter says what the block is fed, and on a pull collar it says what's drawn out. Hover a place to see the fluid's name.

Kits and pulling#

Lines of conduits have no limit, and nor does what a band takes in or what a collar feeds. The one thing with a speed limit is how fast a pull collar draws, and a tier kit doubles it at each tier.

TierKitA pull collar draws
BaseNone1,000 mB/t
TemperedTempered Upgrade Kit2,000 mB/t
FortifiedFortified Upgrade Kit4,000 mB/t
LuminousLuminous Upgrade Kit8,000 mB/t
HarmonicHarmonic Upgrade Kit16,000 mB/t
AllthemodiumAllthemodium Upgrade Kit32,000 mB/t
VibraniumVibranium Upgrade Kit64,000 mB/t
UnobtainiumUnobtainium Upgrade Kit128,000 mB/t

The Allthemodium, Vibranium and Unobtainium kits only exist in packs that have the Allthemodium mod.

Even a base pull collar is quick enough for most fuel lines. These numbers match a Bulkhead Tank of the same tier, so a kitted collar keeps up with a kitted tank.

  • Use the kit on a pull collar to fit it, and any kit it replaces comes back to you. It shows as a ring round the collar's neck.
  • Only pull collars take a kit. Wrench a kitted collar to another job and its kit drops out.
  • A pull collar refuses anything its block pushes into it. A tank with Auto-output on wants a band instead.
  • A pull collar with nothing to draw slows down, up to one try every 5 seconds. It's back to full pace the moment fluid moves again.

The glass#

Each straight run has a glass window down every side, over a narrow channel that shows the fluid the line has carried most of lately. It updates every couple of seconds, so a line carrying several fluids settles on the busiest one.

Water takes the colour of the biome, just as it does in a lake, so your swamp plumbing looks properly swampy.

A collar's screen#

Use a collar with an empty hand to open its screen. It works like the Freight Conduit's, except it counts in mB/t, averaged over the last second.

  • Pulling, on a pull collar, is a bar of what it drew against its limit.
  • Taking in and Feeding are what came into the line here and what went into the block.
  • Filter, on push and pull collars, shows its five places, each drawn with its fluid, and the Whitelist or Blacklist switch.
  • Turn order, on bands and pull collars, sits at the right of the filter's row.
  • Kit, on pull collars, is the slot for a tier kit.

Good to know#

  • Sluice Conduits work with any tank or machine that holds fluid, from this or any other mod.
  • An Enthalpy engine's input face takes fuel from a band or a push collar. Fuel chains shows where that helps.
  • Two collars on one tank can now and then promise more room than there is. The extra goes back into the tank it came from, but if that tank is full too, it's lost. Give each tank one collar per line.

How it works#

  • A line of conduits holds no fluid. What a block pushes into a band goes straight on to wherever it's going.
  • An idle line does nothing at all. Only pull collars act by themselves, and they rest when there's nothing to draw.
  • A pull collar draws from its block's tanks one by one, up to its limit.
  • When a block is full, the line stops offering it fluid for a moment.
  • The glass changes only every couple of seconds, so a long glass line costs nothing to look at.
For pack makers: the settings behind these numbers
SettingDefaultRangeWhat it does
sluiceConduit.pullPerTick1,000 / 2,000 / 4,000 / 8,000 / 16,000 / 32,000 / 64,000 / 128,000Most a Sluice Conduit's pulling collar draws a tick, in mB, by the kit fitted to it: base, tempered, fortified, luminous, harmonic, allthemodium, vibranium, unobtainium. What a band takes in, and runs, have no limit

Only pull collars are limited. Lines of conduits, what a band takes in and what a collar feeds never are.