The Leyden Busbar: a small grey hub with a cyan lamp on each face
Carries
Any amount of power (FE)
Length
As long as you like, with no lag
A collar takes in
Up to 16,000 FE/t to start
Upgrades
Tier kits, fitted on the connectors
ID
enthalpy:leyden_busbar

What it does#

The Leyden Busbar is a slim power cable. It carries FE from where it's made to where it's used.

The whole idea fits in one line. Place busbars between your engine and your machine, and that's it, no setup.

Where a busbar meets an engine, a machine, a Voltaic Cell or a Leyden Vault port, it grows a connector. That connector is called a collar.

Build it as long as you like. A line of busbars right round your base causes no more lag than a single block, so go on, wire up everything.

The Freight Conduit and Sluice Conduit do the same job for items and fluids. All three share the same collars and the same wrench steps, so once you know one, you know them all.

Building it#

Leyden BusbarCrafting Table
8

You'll want a wrench for the fiddly bits. In Enthalpy that's the Calibration Tablet, made from iron and copper. See Tools. Wrenches from other mods work on busbars too.

  1. Place busbars so they touch, face to face. They join into one line.
  2. Place a busbar against a machine, an engine, a cell or a vault port. It grows a collar there.
  3. Use the wrench wherever you need to cut or redirect a join.

Each busbar is a slim bar. A lit hub shows at a junction, a bend or an end, and a straight stretch is drawn as one long beam.

  • A wrench on a join between two busbars cuts it, on both. Use it again to rejoin. It's how you keep two power lines apart where they touch.
  • A wrench on a side with nothing to join makes the busbar look again for something to connect to.
  • A busbar lets skylight through and doesn't darken the blocks beside it.

Collars#

Where a busbar meets a machine, it ends in a collar. The collar's shape tells you what it does, so you never need a menu to find out.

Click a collar with a wrench to change its job. It steps through the list below, then loops back to the start. The message above your hotbar names the block and says what the collar now does, for example East: pulls from the Voltaic Cell.

From left to right, these are the three collar shapes, follow, push and pull.

A busbar over an engine, ending in a plain band round a ringed neck
A busbar over a machine, ending in a funnel narrowing into the machine
A busbar over a cell, ending in a funnel that opens out onto the cell with its petals pressed flat
CollarLooks likeWhat it does
1. FollowA plain bandThe starting mode. It does whatever the machine's side is set to. If that side gives power, the busbar takes it. If that side accepts power, the busbar feeds it. Engines, machines, cells and vault ports need no setup.
2. PushA funnel with its narrow end in the machinePower flows from the busbar into the machine. It feeds the machine ahead of storage and takes nothing back out.
3. PullA funnel with its wide end on the machinePower flows from the machine into the busbar, all the time. Use it on blocks that hold power but don't push it, such as another mod's battery. It feeds the machine nothing.
4. DisconnectedNo collarThe busbar ignores the machine. Click again to start the loop over.

The Allthemodium, Vibranium and Unobtainium kits only exist in packs that have the Allthemodium mod.

Power always moves from a funnel's wide end to its narrow end. Hold a busbar and its tooltip says the same.

Where the power goes#

When power comes into a line of busbars, machines eat first and batteries get what's left.

  1. Machines come first. That includes any machine behind a push collar.
  2. Batteries come second. A battery here is anything whose side both takes and gives power, like a Voltaic Cell or a Leyden Vault port set to Input & Output.

Batteries never fill other batteries. Your cells won't shuffle power back and forth between each other.

Try this line. Put engines at one end and machines at the other. Put a cell or a vault in between, with its busbar face set to Input & Output. The engines fill the machines first, and the spare power goes into the cell. When the engines stop, the cell gives power back and the machines carry on without missing a beat.

A face set only to Input counts as one more machine to fill, not as a battery.

Kits and limits#

Cables carry any amount of power. The only limit is how fast a collar takes power in from a machine. A tier kit, an upgrade item you fit on the collar, raises that limit.

A base collar takes in 16,000 FE/t, which is plenty for engines and most machines. Each kit makes it roughly four times bigger, up to 256,000,000 FE/t at Unobtainium.

TierKitA collar takes in
BaseNone16,000 FE/t
TemperedTempered Upgrade Kit64,000 FE/t
FortifiedFortified Upgrade Kit250,000 FE/t
LuminousLuminous Upgrade Kit1,000,000 FE/t
HarmonicHarmonic Upgrade Kit4,000,000 FE/t
AllthemodiumAllthemodium Upgrade Kit16,000,000 FE/t
VibraniumVibranium Upgrade Kit64,000,000 FE/t
UnobtainiumUnobtainium Upgrade Kit256,000,000 FE/t

So when would you need one? A Leyden Vault is a big power store. Once it reaches the Harmonic tier, each of its ports can push 60,000 FE/t, even with no crystals fed. A base collar takes in only 16,000 FE/t of that. A Tempered kit takes in 64,000 FE/t, which is enough.

To fit a kit, use it on a collar, and the kit it replaces comes back to you. A kit shows as a ring round the collar's neck in the tier's jewel colour. With no kit, the ring is an empty socket.

  • Only follow and pull collars take a kit, because only they take power in.
  • A push collar says No kit needed: feeding a machine has no limit.
  • A kit used on a bar with no collar says kits fit where a busbar meets a machine.
  • Wrench a kitted collar to push or to disconnected and its kit drops out. A busbar also drops its kits when you break it.

A collar's screen#

Use a collar with an empty hand to open its screen. It names the side and the block it meets. A tag says what the collar does, Follow, Push or Pull, and below that are three things.

  • Taking in is a bar showing how much power the collar pulled out of the machine a moment ago. The bar fills as it nears the collar's limit.
  • Feeding shows how much power the collar handed to the machine a moment ago.
  • Kit is the slot for a tier kit. Push collars have no slot.

Use a side where a collar has been disconnected and a message tells you so.

Good to know#

  • Busbars work with any block that stores or uses FE, from this or any other mod.
  • Another mod's wrench does the same job as the Calibration Tablet on busbars.
  • Busbars only join other busbars. Freight and Sluice Conduits can run right beside them without mixing.
  • A Helion Array or a Zephyr Spire gives power from the underside of its core only. Run a busbar up to it and the collar follows it with no setup.
  • A Tidewheel gives power from its gearbox, on the east side, and from under its core. A busbar on either follows it the same way.

How it works#

  • A line of busbars holds no power of its own. When a machine pushes power in, it passes straight on to the machines and batteries that need it.
  • An idle line uses nothing. Only a pull collar keeps working, because it keeps taking power out of its block.
  • Two busbars join only if both agree, so a wrench cut keeps them apart.
  • Batteries never fill other batteries. Power that came out of one battery never goes into another.
  • Within each group in the order above, power is shared evenly. A machine that's already full passes its share on. The machine served first keeps changing, so none goes hungry.
  • A machine that takes only so much at a time gets that much a tick from the whole line. It doesn't get that much again from every engine. Once a machine is full, the rest of the tick's power skips it.
  • Power a pull collar takes from a machine counts like power from an engine, so it can fill batteries too.
  • Nothing goes back out of the collar it came in by.
For pack makers: the settings behind these numbers
SettingDefaultRangeWhat it does
leydenBusbar.collarIntake16,000 / 64,000 / 250,000 / 1,000,000 / 4,000,000 / 16,000,000 / 64,000,000 / 256,000,000Most a Leyden Busbar's collar takes in from its machine, in FE/t, by the kit fitted to it: base, tempered, fortified, luminous, harmonic, allthemodium, vibranium, unobtainium. Runs, and what a collar feeds its machine, have no limit

Only what a following or pulling collar takes in from its machine is limited. Lines of busbars, and what a collar feeds a machine, never are.